How Do You Paint the Plastic Frame on an Entry Door?

Front Door PaintIf you are painting your entry door, you can’t forget to paint the plastic frame on an entry door for the best results. Before you get started, you will want to prepare by gathering the proper materials. The last thing you want is to be in the middle of your paint job only to find out that you overlooked important supplies. Sit down and make a list before you head to the home improvement or hardware store.

Getting Ready To Paint The Plastic Frame On Your Entry Door

You have already gathered everything you need for your entry door, but you don’t want to overlook the plastic frame. Otherwise, you’ll have a door that looks rejuvenated while the frame looks dull. In order to brighten the plastic frame and really make your door pop, you will need to give extra attention to your trim. When you venture out to the store, you will need brushes that are the right size for your plastic frame. Your paint should be a high quality, exterior paint that will endure the elements. An acrylic latex paint is recommended. Don’t forget a primer that is appropriate for plastic. You may opt for a primer and paint that comes from the same manufacturer to ensure they are compatible. You’ll also need sandpaper of at least 120 grit in order to add resistance to the smooth surface. Plastic is nonporous. Without a good sanding and primer, your exterior paint will not stick. Include a drop cloth to protect the surrounding area and painter’s tape. Choose wisely and your plastic frame will last. There’s no need to replace the existing frame when you can make it look like new with a fresh coat of paint, according to Home Guides.

Prepare Your Plastic Trim

Before you actually begin painting, you will need to prepare the surface of the plastic frame on your entry door. You should always make sure you have a clean surface before applying paint to anything. Cleaning plastic trim is simple. All you need is a clean rag, water, and dish detergent. Once you have thoroughly cleaned and rinsed your trim, you can dry it with a towel. Do not take any other steps until the surface has dried completely. You should use painter’s tape to block off any areas that need to be protected, such as the siding on your home and the door itself. You can also put drop cloths down to ensure you do not get paint on your porch, steps, or walkway. Sand the plastic frame of your entry door with a fine sandpaper. Wipe away any dust with a clean cloth. You are finally ready to start painting.

Apply Primer First

You will need to apply an even coat of primer before you paint your plastic trim. You’ll find that a smaller paint brush will work best. Wait the amount of time that is specified for your primer to dry before the painting stage begins. Drying time could range anywhere from a half hour to two hours. It will also depend on the weather. If it is a humid day, expect it to take time for your primer to dry. As a rule of thumb, keep an eye on the weather and choose a day that is going to be mild and dry. Your plastic trim will dry more effectively. Once you’ve primed your plastic trim, you are ready for your paint.

Painting Your Plastic Trim

It’s finally time to paint your plastic trim. You should not use a brush that is too wide when painting a smaller area. Take care to ensure you do not put too much paint on the brush. You can rub it against the can to get rid of any excess paint. Apply the paint in long, even strokes for a smooth coat. When you have painted the entire trim, you will need to allow it to dry. Drying time will vary according to the conditions. As a general rule of thumb, expect your plastic frame to take two hours to dry. Once it is truly dry, you can remove tape and drop cloths.

Your home is your haven, an escape from the rest of the world. You want to give it some TLC. Paying attention to your exterior door and trim can really make a difference. Take your time when you paint the plastic frame on an entry door and use the right materials in order to have an attractive finish.

Related Resource: Roller Doors